View XTEARY-00-0000-000000L01_7735658.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds41 rev 10c product family data sheet cree ? xlamp ? xt-e leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description xlamp ? xt- e is crees highest performing silicon carbide-based le d technology, delivered in crees industry-standard xp/xt packaging. xt- e white sets the new standard for high performance and dramatically lowers system cost. xt- e royal blue is crees highest performing source of royal blue light for remote -phosphor applications. cree xlamp l e ds bring high performance and quality of light to a wide range of lighting applications, including remote- phosphor, color -changing, portable and personal, outdoor, indoor - directional, transportation, stage and studio, commercial and emergency - vehicle lighting. features ? available in white, 80-cri min white, 70-cri min white and royal blue ? warm white available in 85- and 90-cri min. ? new: available in 2200 k cct ? binned at 85 c ? cool white effcacy of up to 148 lm/w (@ 85 c, 350 ma) ? royal blue wall plug effciency of up to 53% (@ 85 c, 350 ma) ? wide viewing angle: 115-140 ? thermal resistance: 5 c/w ? maximum drive current: 1.5 a ? e lectrically neutral thermal path ? v f binning supported for xt-e white and royal blue ? xt- e royal blue sorted into 2.5- nm wavelength bins ? unlimited foor life at 30 oc/85% rh ? refow solderable - jedec j- std-020c compatible ? rohs- and reach-compliant ? ul - recognized component (e349212) cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 table of contents characteristics .......................... 2 flux characteristics .................... 3 relative spectral power distribution ............................... 5 relative luminous flux vs. junction temperature ................. 6 relative radiant flux vs. junction temperature ................. 6 e lectrical characteristics ............. 7 relative luminous flux vs. current .................................... 8 relative radiant flux vs. current . 8 relative chromaticity vs. current and temperature ....................... 9 typical spatial distribution ......... 10 thermal design ........................ 11 refow soldering characteristics . 12 notes ...................................... 13 mechanical dimensions .............. 14 tape and reel .......................... 15 packaging ................................ 16 note: for remote phosphor applications, a separate license to certain cree patents is required.
2 2 characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 5 viewing angle (fwhm) - white degrees 115 viewing angle (fwhm) - royal blue degrees 140 temperature coeffcient of voltage mv/c -2.5 esd withstand voltage (hbm per mil-std-883d) v 8000 dc forward current ma 1500 reverse voltage v 5 forward voltage (@ 350 ma, 85 c) v 2.85 3.4 le d junction temperature c 150 xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
3 3 flux characteristics - white (t j = 85 c) the following table provides several base order codes for xlamp xt- e white le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xt- e binning and labeling document. color cct range base order codes minimum luminous flux @ 350 ma calculated minimum luminous flux (lm)** @ 85 c order code min. max. group flux (lm) @ 85 c flux (lm) @ 25 c* 700 ma 1500 ma cool white 5000 k 8300 k r3 122 140 217 376 xte awt-00-0000-000000f51 r4 130 149 231 401 xte awt-00-0000-000000g51 r5 139 160 247 428 xteawt-00-0000-000000h51 outdoor white 4000 k 6200 k r3 122 140 217 376 xte awt-00-0000-000000fe3 r4 130 149 231 401 xte awt-00-0000-000000ge3 r5 139 160 247 428 xteawt-00-0000-000000he3 neutral white 3700 k 5000 k r2 114 131 203 351 xte awt-00-0000-000000ef4 r3 122 140 217 376 xte awt-00-0000-000000ff4 r4 130 149 231 401 xte awt-00-0000-000000gf4 warm white 2200 k 3700 k q3 93.9 108 167 289 xte awt-00-0000-00000lbe7 q4 100 115 178 308 xte awt-00-0000-00000lce7 q5 107 123 191 330 xte awt-00-0000-00000lde7 70 cri minimum neutral white 2600 k 8300 k q4 100 115 178 308 xte awt-00-0000-00000bce7 q5 107 123 191 330 xte awt-00-0000-00000bdf6 r2 114 131 203 351 xte awt-00-0000-00000bef5 r3 122 140 217 376 xte awt-00-0000-00000bfc3 r4 130 149 231 401 xte awt-00-0000-00000bg53 80 cri minimum white 2200 k 6200 k q3 93.9 108 167 289 xteawt-00-0000-00000hbe7 q4 100 115 178 308 xteawt-00-0000-00000hce6 q5 107 123 191 330 xteawt-00-0000-00000hde5 r2 114 131 203 351 xteawt-00-0000-00000hef4 r3 122 140 217 376 xteawt-00-0000-00000hf50 85-cri minimum warm white 2600 k 3700 k p3 73.9 85 132 228 xte awt-00-0000-00000p8e7 p4 80.6 93 144 248 xte awt-00-0000-00000p9e7 q2 87.4 100 156 269 xte awt-00-0000-00000pae7 90-cri minimum warm white 2600 k 3700 k p3 73.9 85 132 228 xte awt-00-0000-00000u8e7 p4 80.6 93 144 248 xte awt-00-0000-00000u9e7 q2 87.4 100 156 269 xte awt-00-0000-00000uae7 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. ? typical cri for neutral white, 3,700 k - 5,000k cct is 75. ? typical cri for warm white, 2,200 k - 3,700 k cct is 80. * flux values @ 25 c are calculated and for reference only. ** calculated fux values at 700 ma and 1500 ma are for reference only. xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
4 4 flux characteristics - royal blue (t j = 85 c) the following table provides order codes for xlamp xt- e royal blue le ds. additional information on the performance grouping and codes for xt- e royal blue le ds can be found in the xt-e binning and labeling document. dwl kit codes dominant wavelength range order codes, minimum radiant flux @ 350 ma, t j =85 c min. max. group dwl (nm) group dwl (nm) 500 mw - radiant flux group code 32 (l) 525 mw - radiant flux group code 33 (m) 550 mw - radiant flux group code 34 (n) 01 d36 450 d57 465 xte ary-00-0000-000000l01 xte ary-00-0000-000000m01 xte ary-00-0000-000000n01 02 d36 450 d47 460 xte ary-00-0000-000000l02 xte ary-00-0000-000000m02 xte ary-00-0000-000000n02 03 d46 455 d57 465 xte ary-00-0000-000000l03 xte ary-00-0000-000000m03 xte ary-00-0000-000000n03 04 d36 450 d37 455 xte ary-00-0000-000000l04 xte ary-00-0000-000000m04 xte ary-00-0000-000000n04 05 d46 455 d47 460 xte ary-00-0000-000000l05 xte ary-00-0000-000000m05 xte ary-00-0000-000000n05 06 d56 460 d57 465 xte ary-00-0000-000000l06 xte ary-00-0000-000000m06 xte ary-00-0000-000000n06 07 d37 452.5 d46 457.5 xte ary-00-0000-000000l07 xte ary-00-0000-000000m07 xte ary-00-0000-000000n07 08 d47 457.5 d56 462.5 xte ary-00-0000-000000l08 xte ary-00-0000-000000m08 xte ary-00-0000-000000n08 09 d37 452.5 d56 462.5 xte ary-00-0000-000000l09 xte ary-00-0000-000000m09 xte ary-00-0000-000000n09 dwl kit codes dominant wavelength range order codes, minimum radiant flux @ 350 ma, t j =85 c min. max. group dwl (nm) group dwl (nm) 575 mw - radiant flux group code 35 (p) 600 mw - radiant flux group code 36 (q) 01 d36 450 d57 465 xte ary-00-0000-000000p01 xte ary-00-0000-000000q01 02 d36 450 d47 460 xte ary-00-0000-000000p02 xte ary-00-0000-000000q02 03 d46 455 d57 465 xte ary-00-0000-000000p03 04 d36 450 d37 455 xte ary-00-0000-000000p04 xte ary-00-0000-000000q04 05 d46 455 d47 460 xte ary-00-0000-000000p05 06 d56 460 d57 465 07 d37 452.5 d46 457.5 xte ary-00-0000-000000p07 08 d47 457.5 d56 462.5 09 d37 452.5 d56 462.5 xte ary-00-0000-000000p09 note: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements, 2 on cri measurements and 1 nm on dominant wavelength measurements. xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
5 5 relative spectral power distribution - white relative spectral power distribution - royal blue relative spectral power 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 5000k - 8300k cct 2600k - 3700k cct 2200k cct relative spectral power 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) royal blue xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
6 6 relative luminous flux vs. junction temperature (i f = 350 ma) - white relative radiant flux vs. junction temperature (i f = 350 ma) - royal blue relative flux output vs. junction temperature electrical characteristics (tj = 85oc) 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative radiant flux junction temperature (oc) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
7 7 electrical characteristics (t j = 85 c) thermal design 0 200 400 600 800 1000 1200 1400 1600 2.50 2.75 3.00 3.25 3.50 forward current (ma) forward voltage (v) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
8 8 relative luminous flux vs. current (t j = 85 c) - white relative radiant flux vs. current (t j = 85 c) - royal blue typical spatial radiation pattern 0% 50% 100% 150% 200% 250% 300% 350% 0 200 400 600 800 1000 1200 1400 1600 relative luminous flux forward current (ma) relative radiant flux vs. current (tj = 85oc) 0% 50% 100% 150% 200% 250% 300% 350% 0 200 400 600 800 1000 1200 1400 1600 relative radiant flux forward current (ma) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
9 9 relative chromaticity vs. current and temperature (warm white) relative chromaticity vs. current, ww - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 1000 1200 1400 1600 current (ma) ccx ccy t j = 85 c relative chromaticity vs. temperature ww - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 20 40 60 80 100 120 140 160 tsp ( c) ccx ccy i f = 350 ma xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
10 10 typical spatial distribution - white typical spatial distribution - royal blue 0% 20% 40% 60% 80% 100% 120% - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity angle (o) typical spatial distribution 0% 20% 40% 60% 80% 100% 120% - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensit angle (o) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
11 11 thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. relative intensity vs. current (tj = 85oc) 0 200 400 600 800 1000 1200 1400 1600 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
12 12 reflow soldering characteristics in testing, cree has found xlamp xt-e leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3 c/second max. 3 c/second max. preheat: temperature min (ts min ) 100 c 150 c preheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
13 13 notes l umen m aintenance projections cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating led lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document at www.cree.com/xlamp_app_notes/lm80_results. please read the xlamp long-term lumen maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. m oisture s ensitivity in testing, cree has found xlamp xt-e leds to have unlimited foor life in conditions 30 oc/85% relative humidity (rh). moisture testing included a 168-hour soak at 85 oc/85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. cree recommends keeping xlamp l e ds in their sealed moisture-barrier packaging until immediately prior to use. cree also recommends returning any unused l e ds to the resealable moisture-barrier bag and closing the bag immediately fter use. r o hs c ompliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com. reac h c ompliance reach substances of high concern (svhcs) information is available for this product. since the european chemical agency (echa) has published notice of their intent to frequently revise the svhc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date reach svhc declaration. reach banned substance information (re ach article 67) is also available upon request. ul r ecognized c omponent level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ul 8750. v ision a dvisory c laim warning: do not look at an exposed lamp in operation. e ye injury can result. see led e ye safety at www.cree.com/ xlamp_app_notes/led_eye_safety. xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
14 14 mechanical dimensions all measurements are 0.13 mm unless otherwise indicated. top view side view bottom view anode size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) recommended pcb solder pad recommended stencil pattern (shaded area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
15 15 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) 12.0 +.3 -.0 1.75 .10 4.1 8.1 2.5.1 1 / 1 3.000 b 2402-00014 xp hew loading spec -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd b added cathode and anode note reoriented device dc 2/26/12 end start user feed direction cathode side anode side user feed direction 7" 1.5 .1 13mm pocket tape carrier tape y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 y y x x ref 0.59 w f(iii) p1 d1 1.5 min. bo ao r 0.2 typical ref 4.375 ko other material available. (iv) (iii) (ii) (i) hole to centerline of pocket. measured from centerline of sprocket holes is 0.20. cumulative tolerance of 10 sprocket to centerline of pocket. measured from centerline of sprocket hole section y-y section x-x 2.0 0.05 (i) p2 1.55 0.05 do 4.0 0.1 (ii) po 1.75 0.1 e1 0.30 0.05 t ref r 2.24 2.40 ko +0.0/-0.1 3.70 1 w f p +/- 0.05 +/- 0.1 +0.3/-0.1 5.50 8.00 12.00 ao 3.70 +/- 0.1 bo +/- 0.1 cathode side anode side 13 61 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 +/- 0.5 ps 10 fxi se cm, 2004 fxi pdf edi - od 7.5 13 61 12.40 0 + 2.00 measured at hub 12.40 measured at inside edge 16.40 sheet 1 of 1 1:2 2400-00005 size title rev. c drawing no. date date date check final protective finish material approved drawn by third angle projection .x 0.3 x 2 .xx .10 .x .25 for sheet metal parts only .xx .13 x 1 unless otherwise specified dimensions are in millimeters & before finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 361-4770 4600 silicon drive durham, n.c 27703 notice cree confidential. this plot and the information contained within are the proprietary and confidential information of cree, inc. this plot may not be copied, reproduced or disclosed to any unauthorized person without the written consent of cree, inc. reel, 7" x 12mm wide b liudezhi 2012/5/25 +/- 0.5 ps 10 fxi se cm, 2004 fxi pdf edi - od 7.5 xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
16 16 packaging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, qty, reel id label with cree bin code, qty, reel id label with cree order code, qty, reel id, po # label with cree order code, qty, reel id, po # label with cree bin code, qty, reel id unpackaged reel packaged reel boxed reel xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2014 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: cree, inc.: ? xteary-00-0000-000000k01? xteawt-00-0000-000000f51? xteawt-00-0000-000000g51? xteawt-00-0000- 00000lae7? xteawt-00-0000-00000lbe7? xteawt-00-0000-00000lbe8? xteary-00-0000-000000k03? xteary- 00-0000-000000k05? XTEARY-00-0000-000000L01? xteary-02-0000-000000n01? xteary-00-0000-000000l06? xteary-02-0000-000000k01? xteary-00-0000-000000k04? xteary-00-0000-000000k08? xteary-00-0000- 000000l05? xteary-00-0000-000000k02? xteary-00-0000-000000k07? xteary-00-0000-000000k09? xteary-00- 0000-000000l03? xteary-00-0000-000000l09? xteary-00-0000-000000l07? xteary-00-0000-000000l04? xteary-00-0000-000000k06? xteary-00-0000-000000l08? xteary-00-0000-000000l02? xteary-02-0000- 000000l07? xteary-00-0000-000000m01? xteary-00-0000-000000m02? xteary-00-0000-000000m03? xteary- 00-0000-000000m04? xteary-00-0000-000000m05? xteary-00-0000-000000m06? xteary-00-0000-000000m07? xteary-00-0000-000000m08? xteary-00-0000-000000m09? xteary-00-0000-000000n01? xteary-00-0000- 000000n02? xteary-00-0000-000000n03? xteary-00-0000-000000n04? xteary-00-0000-000000n05? xteary- 00-0000-000000n06? xteary-00-0000-000000n07? xteary-00-0000-000000n08? xteary-00-0000-000000n09? xteary-02-0000-000000k02? xteary-02-0000-000000k03? xteary-02-0000-000000k04? xteary-02-0000- 000000k05? xteary-02-0000-000000k06? xteary-02-0000-000000k07? xteary-02-0000-000000k08? xteary-02- 0000-000000k09? xteary-02-0000-000000l01? xteary-02-0000-000000l02? xteary-02-0000-000000l03? xteary-02-0000-000000l04? xteary-02-0000-000000l05? xteary-02-0000-000000l06? xteary-02-0000- 000000l08? xteary-02-0000-000000l09? xteary-02-0000-000000m01? xteary-02-0000-000000m02? xteary- 02-0000-000000m03? xteary-02-0000-000000m04? xteary-02-0000-000000m05? xteary-02-0000-000000m06? xteary-02-0000-000000m07? xteary-02-0000-000000m08? xteary-02-0000-000000m09? xteary-02-0000- 000000n02? xteary-02-0000-000000n03? xteary-02-0000-000000n04? xteary-02-0000-000000n05? xteary- 02-0000-000000n06? xteary-02-0000-000000n07? xteary-02-0000-000000n08? xteary-02-0000-000000n09? xteawt-00-0000-00000lfe5? xteawt-00-0000-00000lff5? xteawt-00-0000-000000e50? xteawt-00-0000- 000000e51? xteawt-00-0000-000000e53? xteawt-00-0000-000000ec1? xteawt-00-0000-000000ec2? xteawt- 00-0000-000000ec3? xteawt-00-0000-000000ed1? xteawt-00-0000-000000ee1? xteawt-00-0000-000000fe0? xteawt-00-0000-000000he2? xteawt-00-0000-00000be50? xteawt-00-0000-00000be51? xteawt-00-0000- 00000be53? xteawt-00-0000-00000bee1? xteawt-00-0000-00000bez7? xteawt-00-0000-00000bhe2? xteawt- 00-0000-00000hd50? xteawt-00-0000-00000hd51? xteawt-00-0000-00000hd53? xteawt-00-0000-00000hde1? xteawt-00-0000-00000pae8

▲Up To Search▲

Price & Availability of XTEARY-00-0000-000000L01

	To Download XTEARY-00-0000-000000L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .